AG PRODUCTS


Delta 16

Dutch Industries Wind Driven Energy - Simplified Technology For the Future!

Having been responsible for the installation and monitoring the operation of twenty_one windmills in the West African County of the Gambia over the past ten years I can highly recommend the Delta 16.

The working parts of the windmill prove to be very durable and long lasting requiring a minimum of servicing. It operates effectively throughout a wide range of wind speeds, delivering water at surprisingly low windspeeds.

To assemble and install the windmill requires only a few simple hand tools and no special equipment.

Laurance Slind - The Gambia W. Africa.


Turbine Type Upwind
Axis Horizontal
Rotor Diameter 4.88 m (16')
Stroke 16.5cm (6.5"
Blade Design Delta Wing
Number of Blades 32
Blade Material Galvanized Steel
Tower Height 9.15 m (30')
Height to top of Blades 11.9 m (39')
Weight of Tower 445 kilograms (980 lbs.)
Weight of Head 330 kilograms (720 lbs.)
Transmission Direct Drive (no gears)
Gear Ratio 1:1
Furling Automatic
Furling Commences at 36 kph or 22 mph or 10 m/s
Cut in wind speed 12 kph or 7.5 mph or 3.00 m/s
Lift Counter Balanced
Foundation 4 Footings (6" dia. x 5' deep or 15.24 cm x 1.53 cm)
Shipping Dimensions (Windmill Assembly & Tower only) Wooden Crate - 91 cm x 91 cm x 366 cm (36" x 36" x 144")
Shipping Weight(Windmill Assembly & Tower only) Approx. 1,000 kilograms (2,200 lbs.)


Pump Flow Vs Maximum Lift For the DUTCH Delta 16 Water Pump

MAXIMUM LIFT / PUMP DIAMETER / MAXIMUM FLOW

Feet Metres Inches Millimetres Litres per minute Imperial gallons per minute USA gallons per minute
1728 527 1-1/16" 27 3.1 .663 .8287
1032 314 1-3/8" 34.9 5.05 1.11 1.3875
555 170 1-7/8" 47.6 11.3 2.07 2.5875
358 118 2-1/4" 57.2 13.2 2.98 3.725
258 79 2-3/4" 69.9 19.8 4.45 5.562
216 65 3" 76.2 24.0 5.29 6.6125
160 49 3-1.2" 88.9 2.7 7.20 9.00
121 37 4" 101.6 42.7 9.40 11.75
96 29 4-1/2" 114.3 54.0 11.9 14.875
78 24 5" 127 66.7 14.7 18.375
65 20 5-1/2" 139.7 80.8 17.8 22.25
54 16 6" 152.4 96.1 21.2 26.5
46 14 6-1/2" 165.1 113 24.8 31.00
9 12 7" 177.8 131 28.8 36.00
35 11 7-1/2" 190.5 150 33.0 41.25
30 9 8" 203.2 171 37.6 47.00
27 8.2 8-1/2" 215.9 19 42.5 53.125
24 7.3 9" 228.6 216 47.6 59.50
20 6 9-1/2" 241.3 241 53.0 66.25
19 5.8 10" 254 266 58.8 73.50